Rendered at 19:53:09 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
hspeiser 2 days ago [-]
I spent a few hours trying to get this to work, and I couldn’t get it to produce usable results on anything except the training data, even with very simple drawings.
I noticed in the GitHub that they mention it is only around 60% reliable even on their own training data, but the image shown on the front page feels pretty misleading. I made 10 images that were very similar in complexity to the examples shown, and even after running it around 50 times on each image, not a single one worked correctly. In the rare cases where it produced something, the output was completely wrong.
This seems pretty misleading in its current state and definitely needs more work.
Karliss 1 days ago [-]
When skimming a research paper in addition to abstract don't forget to read "limitations and future work" and "conclusions".
In the limitation section they are quite direct with it: "images used .. are mostly isometric and noise-free CAD-images" and "limited CAD vocabulary used in this study needs to be extended by including more sophisticated CAD tokens such as revolve operation, edge operation (e.g., fillets/chamfers)". It currently supports only series of pads (can be subtractive). Many simple beginner exercises of seemingly similar complexity don't fit those constraints. Some of the parts shown could be more naturally created using wider set of tools, but technically can be created using only pads.
So even if you tried with clean screenshot of simple 3d model, it will likely fail if camera settings aren't right, and it will fail if model can't be represented using series of pad operations. Anything containing spheres, cones, nearly all lathe parts, fillets which can't be included in 2d sketches will fail. In theory arbitrary extrusion angles are supported, but all examples showed only axis aligned parts.
That said I wouldn't be surprised if it failed even if you considered exact limitations not just similar complexity in your attempts.
Assuming images in the googledrive are the training data, "mostly isometric and noise-free CAD images" is a bit of understatement. All of them are at very specific angles using and single style. Specific solid gray infill color for "images", and white infill with weird shading around perimeter for "sketches". Both with white background and pixelated non antialised 1px lines. No reason to expect it capable of processing anything which doesn't have exactly same visual style. For practical product that would have to be solved but that wasn't really the point of this research. All the style transference papers have show that it's more or less solvable problem, but for a paper exploring what model architecture and 3d representation could work best for AI cad it seems like unnecessary distraction that would only bloat the training costs and time. Most annoying part is that it makes hard to test the model with your own inputs.
hspeiser 20 hours ago [-]
Took isometric screenshots of drawings from very simple parts I made in onshape and imported them. They were black and white and very clear.
ololobus 1 days ago [-]
I’m also confused by their examples. All of them seem to be perfect renders/exports from 3D models — this is not the use case where I see it the most useful. Making a parametrized CAD model out of a hand-drawn sketch — yes, please
galangalalgol 1 days ago [-]
I have tried getting claude to generate openscad for sketches it does poorly. But that would be great
SpaceNoodled 1 days ago [-]
One method that I found works really well for OpenSCAD is learning its syntax and features and making the models myself based on my own sketches.
jrflo 2 days ago [-]
Neat, but I don't really see the utility. The time consuming part of CAD drawing comes from figuring out the correct dimensions of each feature, spacing, sizing, tolerances, etc., and constraining the drawing in a way so that it's easy to tweak later on- which this doesn't do at all. Maybe you could draw a 2d sketch of what you want then generate it, but you'd still have to do the hard part.
ololobus 1 days ago [-]
I think this is true under assumption that you know the CAD tool well. From my recent experience (I have a 3D printer), I regularly find myself in a situation where I know what I want to do, I can do measurements and I can make a sketch on a paper. Yet, making it a proper 3D model in something like FreeCAD is super tedious. I know OpenSCAD relatively well, but when it comes to something more complex I struggle a lot. The recent example, I was making a water tap for Lego duplo kitchen sink for my little one :)
So I would really appreciate a good AI/LLM tool that I can feed my sketch and parameters and it can save me hours of searching web and watching tutorials on how to extrude a circle over a curve
BTW, any existing AI tools work really well with OpenSCAD, so if you want a parametrized model that can be made out of simple shapes, I highly recommend this flow
mk_stjames 1 days ago [-]
Your comment on how you feel trying to execute a model is similar to the inverse of how many Mechanical Engineers (used to) talk about coding - they know what they want, they can write down what they want a program to do, they just don't know what to type out in a programming language or how to compile the code or use the IDE, etc etc.
There are mechanical engineers out there who can literally model objects nearly as fast and they can 'think' about the layout of said object. If you look at the complexity of, say, a CAD model from a real, highly complex aluminum casting section of an automotive subframe, or the living-room-sized cross-fuselage spar forging of a fighter aircraft, with hundreds of ribs and fillets and features- and compare that to the simple model you are trying to make in OpenSCAD, you should quickly realize the parallels in difficulty you are trying to express (similar to the person without knowledge of C++ or Python watching someone be able to build applications by typing code from their fingertips as if they already knew what to type...)
You are struggling for a few reasons- 1., it is a knowledge hurdle of an entire field you are trying to surmount- again, go watch someone actually model a real, complex part and watch the speed, they can do so in a tool like Solidworks, CATIA, NX, etc... at a rate that is far different because they have experience that it can honestly take even good people years to accumulate - and 2. they are using professional tools - you mention OpenSCAD, like it is CAD, but it isn't. It is programmatic mesh generation, and it turns out that programmatically typing out how to generate complex things is much more difficult than a combination of a graphical GUI and graph-based generator that all big CAD programs figured out starting in the 1980s. If those tools you use were really the best way to make complex models 'paramaterized', then why do we design our fighter jets, Formula 1 cars, or Space X rockets in Dassault's CATIA or Siemen's NX ?
You want a LLM to take a sketch to your CAD, but what I'm saying is, there are people out there that can skip the sketch and build the CAD as fast as you can likely hand draw the first sketch, and these are skills you can actually learn, but you may just be using the wrong tools and have not had the practice necessary.
8note 1 days ago [-]
as a mech who then did a cs degree, openscad is the brainfuck of cad
like its purposefully built to be unusable
johnvanommen 1 days ago [-]
> So I would really appreciate a good AI/LLM tool that I can feed my sketch and parameters and it can save me hours of searching web and watching tutorials on how to extrude a circle over a curve
I think this is possible, but the ‘trick’ would be translating your instructions in English into some kind of language that the CAD software understands.
I’m on a bunch of 3D printing forums, and everyone tries to describe what the finished product would LOOK like. They end up making PICTURES when what they really want is a STL file.
Two dimensions are easier to visualize then three, so let’s put it this way:
If you wanted to turn “English” into “a 2D image that’s dimensionally accurate”, you’d want to translate from “English” to “SVG.”
SVG is dimensionally accurate. JPG isn’t. The file format itself has no concept of “dimensions” only “pixels.”
gwbas1c 1 days ago [-]
I've resorted to using Rust + vcad, although I think I'll give OpenSCAD a spin.
I haven't tried telling AI to "make a thing," but I'm able to get Co-pilot to refactor code. It's just the geometry that makes my head spin.
hadlock 1 days ago [-]
I've been having excellent success with prompts like "use cadquery and build x" for moderately simple stuff, like bearing clearance gauge for 3d prints. I don't like openscad because while it will technically produce .step , they don't import "clean" into fusion, etc the way step files produced by cadquery do
andyfilms1 1 days ago [-]
If you use something like OnShape or Fusion, you could easily get comfortable enough to model those parts in about a day. Once get the hang of it, you'll be amazed how fast you can work.
It will take much longer than a day for AI to get to this level, so there's not much to lose by just learning how to use the software now :)
smartmic 2 days ago [-]
As is often the case in the GenAI space, this also appears to be a solution to a non-existent problem.
willis936 1 days ago [-]
I very much have this problem. I am uninterested in the art of sketching and constraining. I have spent many hours attempting and am content with the knowledge that I don't have the touch but still sometimes have problems I want to solve with 3D prints. LLMs could offer a solution, but they are bullshit machines and by their nature over promise. Drafting is not a trivial skill that we just wave a wand and magically have it automated. We'll get there eventually, but we're not there.
andyfilms1 1 days ago [-]
A little suggestion in case you decide to try again, just don't worry about constraints. If you're making one-off parts for yourself, just sketch what you need and don't worry about trying to make it parametric. Get the part done and move on.
willis936 1 days ago [-]
That's what I've done. It's just such a chore. I see what my ME counterparts can do in an hour and it takes me days. I could likely get myself to be a better MCAD designer with discipline, but there's little guarantee it would make me enjoy it. I enjoy ECAD and I'm good at it, so it will always be a fine hobby for me.
8note 1 days ago [-]
MEs take at least a course in it, and its a great course to take. you could probably audit it
across MEs, its also the most fun couple classes of the degree, since they build a skill other tha math - visuallizing objects in 2d and 3d at the same time, and guessing whats on the back side of drawings.
it will also inprove your sketches on paper, so they
a different option would be that if you know what you want, but cant be bothered to draw it beyond a sketch, you might actually want a small mill instead of a 3d printer.
stck 2 days ago [-]
If you can just take a pencil and draw a piece of furniture, press a button and get a semi-decent CAD drawing to tweak, that'd be a huge tool for carpenters and such.
Arch-TK 1 days ago [-]
"to tweak" is probably quite far away even if "get a semi-decent CAD drawing" was remotely reliable which it isn't.
VLM 1 days ago [-]
This is a classic outside the field vs inside the field conceptual disagreement.
From the outside, the hard part of designing a chair is making a blueprint. At least making a blueprint looks hard to people who've never made one. According to outsiders, the next layer of the onion is perhaps inserting reasonable constraint dimensions for similar reasons.
From the inside, as a guy who's recreationally made furniture, the hard part is judgment about joint selection and design, experience with wood warping (all wood changes shape with the seasons, a good woodworker makes it look easy to work around and a bad one makes expensive firewood that rapidly falls apart). Another insider PoV is judgment about wood selection to get the correct balance of final finish durability and appearance. Finally working toward outer layers of the onion, its time to do parametric joint design decisions... What's the ideal number and size of dovetail joints for, perhaps, a drawer.
I've seen prints of chairs before I don't need a LLM to make one similar to the ones I've seen before and could probably make from memory (at least ones I built myself), the library has loanable books and woodworking magazines. I do see the attraction from the outside.
Consider something like a Windsor chair. The larger the wedge in the spindles the tighter and longer lasting the chair until you break something trying to force them in; there's a lot of judgment and experience in designing, selecting, and installing spindles, but none of it is written down so it'll be hard to train a LLM... Tighten it until it breaks then don't tighten it that much next time. Most super detailed plans for Windsors are for inferior machine produced replicas which are not necessarily useful for a fine woodworker and are not exactly what craftsmen would aspire to. People who want "a cheap chair" will buy a 4-pak of folding chairs from walmart anyway, not make a homemade Windsor-style chair.
Another somewhat more blunt example is for actual woodworkers the "problem" with hand cut dovetails isn't knowing what they look like or how to make a diagram of one, but gaining the experience behind a hammer and chisel to push your luck while cutting them as far as possible without going too far and turning the part into scrap. One unavoidable part of woodworking is I've turned quite a bit of wood into scrap on the last step; oh well make another. At least I can burn scrap wood to keep warm LOL.
Its kind of like from outside the programming fraternity the non-programmers think the only skills required to program are typing real fast and being very experienced at fizzbuzz during interviews. But that doesn't work IRL, from an inside-out perspective.....
The woodworking world is not exactly lacking for a library of "semi-decent" plans. An automated system to make enormous quantities of low quality unverified and untested plans would not really help the field, no.
KaiserPro 1 days ago [-]
Good question!
So why $work-1 spent so much time on this was quite logical. When you have point clouds generated from crappy head mounted cameras, you get models that are very complex.
So an active area of research is point cloud to "CAD" model (ie simplyfied, where a LACK tabl would be ~40 triangles rather than 400k)
One of those ways is to say "oh this pointcloud looks like a table, lets generate a bunch of hypothesis tables and see if they fit." One way to do that is to have a model that understands parametric CAD, and can create a number of tables with parameters that can be adjusted until it fits.
A perhaps easier way is to take a point cloud, get an image model trained on CAD models to draw models, in 2d imagery, then use something like this to get an actual model out.
Its not efficient, but it might work.
There are also lots of other cases, like automatic plagiarism, which are less good.
johnvanommen 1 days ago [-]
If you wanted to brute force it, it might be possible to have it generate a hundred outputs and then include a second pass to automatically select the generated model that most accurately resembles the expected output.
Basically leverage the randomness to create many variations, then select the most accurate variation automatically.
Terribly wasteful of time and processing power, but so is using GPU time to make pretty pictures randomly.
jrflo 1 days ago [-]
[dead]
whazor 2 days ago [-]
Strangely, it would work better if it generates CAD as code with clear labels. Then you can grab your caliper and make sure its all the right size.
Karliss 1 days ago [-]
Even if you are completely skeptical about the AI cad model generation they also demonstrated their representation for model search/matching. Having a smarter search method for cad models based on 3d geometry in addition to traditional text search would be nice to have.
CodeCompost 2 days ago [-]
Missing IKEA screws.
timvdalen 2 days ago [-]
IKEA will send you those for free if you order them on the site, including free shipping
nextlevelwizard 2 days ago [-]
If down the line this model could create 3D model from 2D images that would be very neat way to pay less for war gaming models
satvikpendem 2 days ago [-]
Gaussian splats and neural radiance fields already exist.
nextlevelwizard 1 days ago [-]
I dont know how that solves this. How do you get STLs out of gausian splats?
whywhywhywhy 1 days ago [-]
Not splats as such but text to polygon model and image to polygon model exist and for the use case of figurines that's fine to convert to formats for 3D printers.
semi-extrinsic 2 days ago [-]
You can already do this with apps like Kira. I believe it is especially good on the iPhone variants with LiDAR.
nextlevelwizard 1 days ago [-]
I dont know that app specifically, but from all videos of different lidar and other 3d scanning tools I have seen the results are pretty bad and require a lot of sculpting after the scan. Whole point was that with few images the ML model could construct the actual 3d model for you
protocolture 2 days ago [-]
Already done. Cults generally has stls of 40k models before release. Its just a matter of finding them.
nextlevelwizard 1 days ago [-]
doesnt really help if I cant find them and I guess if I could find them so could GW and they would be taken down. Having an application you can host at home that could do the job from pictures would be awesome
protocolture 15 hours ago [-]
Cults used to be really good at avoiding this stuff, but Scrungaloids, which is just a parody of 40k that apes some rogue trader aesthetics got nuked within 48 hours of going live on cults so the dream seems to be dead.
cadmeup 2 days ago [-]
[dead]
cjtrowbridge 2 days ago [-]
This has been easy with OpenSCAD for a long time. I have made lots of cool, complex models this way. I built a repo of the prompts I use to show the llm how to do this and it includes many of the models I've created this way...
OpenSCAD has almost zero crossover with B-rep modelling ('true' CAD, what this apparently is), though.
Karliss 1 days ago [-]
This isn't B-rep based modelling. Far from it. It builds up the feature tree and then uses geometry kernel to generate B-rep based representation. The final generator output script could probably be adjusted to generate openscad. It only supports 2d drawings containing lines, arcs and circles and extrude operation for making them 3d. Operations like fillets and chamfers which depend on intermediate B-rep model state are not supported.
I would even argue that for basic modelling majority of tools/features in CAD operate at the abstraction closer to CSG for describing what and B-rep is only treated as how. Just like good chunk of code based CAD use combination of CSG for what and triangle mesh based geometry engine for how. That's assuming you consider standard 2d->3d operations (extrude, revolve, sweep along arbitrary 2d profile) as valid primitives for CSG.
User comes into direct contact of B-rep in very specific situations: 1 doing operations like fillets/chamfers/draft/thickness based on intermediate geometry, 2 attaching sketches or other features to generated geometry or using generated edges (instead of new sketches) for guiding operations like complex sweeps, 3 surface based modelling workflows where you build up the the solid from individual faces typically including complex curved surfaces.
In case of 1 and 2 the the dependency on b-rep based representation is only marginal, in theory you could select edges in triangle mesh based underlying representation but the final result but quality of result wouldn't be as nice and TNP issues for parametric model editing would likely be even bigger than it is for existing CAD. That's not really CSG territory anymore but isn't exclusive to B-rep either, and involves a bunch of work that's outside the scope of B-rep. In non parametric mesh modellers with more destructive editing workflows like blender chamfers and fillets work fine. And if anything for reliable parametric models you often want to limit dependencies on intermediate geometry as that depends on CAD keeping track of where each edge/face originated from outside the b-rep and increases the chance of TNP issues.
3 is critical for industrial design containing large amount of complex curved surfaces like cars and other consumer products, but there are also many more technical parts where it can be completely ignored. Cad tutorials for beginner tutorials almost completely ignore this category of cad modelling. The part about not being exclusive to b-rep also applies for surface modelling part.
iamgopal 2 days ago [-]
how hard it is ? with AI prevalent, how long ? any pointers to start from ?
bschwindHN 2 days ago [-]
If you want something based on B-Rep, look at projects that use opencascade under the hood, as that is one of the only B-Rep CAD kernels available which is free and open source. Some examples would be CADQuery, CascadeStudio, or RepliCAD.
twelvechairs 2 days ago [-]
OpenSCAD uses CSG which is generally better. Easy to convert CSG to BREP. Cant generally do the opposite
auxiliarymoose 2 days ago [-]
It's easy to convert because CSG is a small subset of what BREP can do.
It's analogous to "all squares are rectangles, but not all rectangles are squares" (squares=CSG, rectangles=BREP)
CSG by itself isn't suitable for most CAD use-cases.
rowanG077 2 days ago [-]
How can I convert openSCAD models to true STEP files? As in no meshes. I Literally have wanted that for years.
tinmith 2 days ago [-]
You need to use https://github.com/smurfix/buildscad which can convert OpenSCAD to Build123d, then you can export a STEP file. It has a few limitations, but for simple OpenSCAD files it can generate an equivalent representation in OpenCASCADE.
rowanG077 2 days ago [-]
Yeah, that fails for even moderately complex models...
jvanderbot 2 days ago [-]
Same. Working with an LLM and OpenSCAD has been totally painless.
richk449 2 days ago [-]
I’ve been using cadquery and build123 with Claude code and I find it incredibly painful.
What is your workflow for llm integration to openscad?
jacobn 2 days ago [-]
I just ask it for what I’m looking for (doing very simple “spare part” level at home 3d printing, nothing fancy or elaborate) and it gives me a starting point. Then I sometimes just edit the scad code by hand, and some times I ask the AI to revise, sometimes a mix (many iterations).
For very simple geometries it works great, but it very quickly becomes apparent that there’s a bit of a disconnect between “LLM views image” and “LLM emits scad that looks like that image” when it comes to anything non-trivial.
Still gives me a starting point I can mess with, which is great since I have zero CAD training or experience.
(I’m not the commenter you replied to)
IshKebab 2 days ago [-]
Tbh that sounds harder than just learning CAD, which is really not that difficult if you use a proper parametric editor - I would recommend SOLIDWORKS first. It's got the easiest UX so is ideal for learning. They actually have a vaguely reasonably priced subscription now, but IMO it's still way too much for occasional hobby use so I'd recommend just pirating it (which is easy).
Once you have learnt a bit then the only FOSS options that are worth a damn are a) SolveSpace which is quite good and light, has a slightly quirky UI (but not in a bad way) but unfortunately has some critical missing features at the moment - notably bevels/chamfers. Although I did see someone made a sloppy PR to add them so we'll see where that goes.
Or b) FreeCAD which is actually good now and fairly close to SOLIDWORKS (at least for the basic stuff you're likely to use) and has a reasonably good UX. Some rough edges still but overall it's very usable. Good enough that I reach for it instead of pirating SOLIDWORKS these days.
The basic workflow is pretty simple:
1. Make some planes, referenced from existing geometry.
2. Make sketches on the planes.
3. Extrude/revolve them (either adding or subtracting from the existing geometry).
4. Repeat until you have the right shape.
5. Add a load of chamfers to make it pretty.
jvanderbot 1 days ago [-]
So, steps 1-5 can be done by clicking (tools you recommend), or writing lines of script (OpenSCAD). Once you grok those steps by just doing it yourself, you quickly get to a point where an LLM is quicker at editing the text file that represents the steps to generate the model. Things like "Make the extruded face I labelled blahblah do xyz", and it's quite good. Even better: "Parameterize curve abc and generate this spread" or something. You get it.
For LLM-assisted bespoke model generation it's still fine if you specify a process to follow, and can "speak the language" (knowing 1-5).
This is no different than purevibe vs LLM-assistance, IMHO. What TFA refers to is a more end-to-end, no iterative process, with no single touchpoint script like OpenSCAD offers, so it's very much _not_ a collaboration and requires no knowledge of how CAD models are made.
But this thread is moreso about iterating on an OpenSCAD specification using LLMs.
q3k 2 days ago [-]
From my experience people who heavily rely on LLMs are allergic to learning anything new (with the exception of learning new and improved ways to generate slop). They just 'want to get stuff done', even if it means staying in a local maximum forever.
I've one shotted a light saber hilt with threaded parts and it worked flawlessly.
pdntspa 2 days ago [-]
Not OP but I just ask Claude Code to make me an openscad file. If I need changes I ask for them in plain english. If you are specific, it's not the quickest loop but it works. I usually ask it to parameterize the model enough so that I can quickly print small prototypes in my 3d printer. Once I am happy with the mini version I print the full-size model.
alexgoodhart 2 days ago [-]
What is the inference overhead on this
q3k 2 days ago [-]
I'm sorry, but which ones of these are complex? I'm looking through some [1] [2] [3] of the output PNGs and they look trivial. Like, my first 3d model in Blender trivial.
In comparison, here's one of my recent designs: what I would still call a very simple case [4]. And it's not like I'm a trained mechanical engineer working commercially, this is stuff I design in my spare time as a programmer.
I wanted to see how well it performed on real pictures of parts or hand-drawn drawings, but when I tried setting up the docker image, immediately ran into all kinds of dependencies not being installed. The examples make me suspect it doesn't work well beyond images that were generated from CAD in the first place.
xiaoyu2006 2 days ago [-]
> docker image, immediately ran into all kinds of dependencies not being installed
Ironically the former is engineered to avoid the latter.
pocksuppet 1 days ago [-]
A Docker image is a reinvention of a program, and a Docker container is a reinvention of a process. At first they were self-contained - but so were the first programs and processes.
sjjsjsvdd 2 days ago [-]
[dead]
atoav 2 days ago [-]
If only there was some kind of container that allowed you to bundle all your dependencies together with your software.
dnnddidiej 2 days ago [-]
That thing is called Nix
coldtea 2 days ago [-]
Parent said "bundle"
dnnddidiej 1 days ago [-]
Nix to give you reproducable builds. Docker to bundle.
Docker files alone is usually full of aptgets and curlshs. Which might be why the docker image wont build.
geuis 2 days ago [-]
To the author if they happen to see this. Please kill the auto playing video. If someone is listening to something else on their phone this always takes over and interrupts.
whatsupdog 2 days ago [-]
TIL: people are still browsing the internet without an ad blocker.
cassianoleal 2 days ago [-]
Doesn’t even have to go that far. TIL people are still browsing the internet without disabling auto-play on their browsers.
culi 2 days ago [-]
Should be disabled by default tbh.
dyauspitr 1 days ago [-]
How do you use an actually effective ad blocker on the iPhone?
9x39 1 days ago [-]
If you're okay with merely effective, try using a DNS server based list from nextdns.io. This is not sophisticated like uBlock Origin, but it is effective. I use it on my phone and an old iPad in my kitchen that would otherwise be obliterated by the ads on cooking sites.
geuis 1 days ago [-]
I use 2 and they work very well. No options for auto playing videos though.
1Blocker and AdGuard.
For 1Blocker I have everything enabled except adult content and scripts. AdGuard has everything turned off except for General.
These are just the free versions too.
I've been using this setup for a few years and it works close to 100% of the time.
dyauspitr 23 hours ago [-]
I have Adguard and still get YouTube ads. Does 1Block fix that?
geuis 10 hours ago [-]
Yah. But for YouTube I use Vinegar. I don't use the YouTube app, prefer the mobile website.
nancyminusone 1 days ago [-]
If you can get this to read dimensions and apply constraints, you've done it. But that doesn't look like the case.
Every time I see one of these things,its like whoever worked on it doesn't know how to use CAD or understand what CAD is used for.
rirze 1 days ago [-]
This.
Every 6 months, I reevaluate how well LLMs can model from scratch or can modify existing files.
It's very superficial (atleast the last time I tried it). I'm guessing if/when LLMs crack visual reasoning, they might be able to do it.
Seeing as I'm attempting to build my own CAD program in Rust I checked out the hosted website. I'm not really sure what is supposed to be working and what isn't.
I can't help but to be skeptical of one person writing ~115k LOC in 4 months which is just the Rust crates, nevermind the frontend (which is another 100k LOC!!!).
I'm curious why you decided to go with "eager" tessellation. Creating a circle immediately results in a bunch of lines which resemble a circle but would fail under tangency constraints quickly. Is this a current limitation or part of the strategy for the kernel?
clmul 1 days ago [-]
As someone also working on CAD in their spare time, also tried the hosted app. I get the feeling that this is made by someone who has never opened a (professional) CAD app at all. It feels like a mix between a tool like blender and CSG-style CAD, but even all of that doesn't seem to work. Maybe this is the proof that vibe coding does not work, at least not for this kind of application.
In my own project I use LLMs very sparingly and hesitantly, but made the observation that they are not very useful on the hard parts of CAD. I expect this is because of a lack of training material. Most professional CAD applications are proprietary and books on the topic are usually sparse on implementation details. The non-BRep CAD applications such as OpenSCAD and family are probably overrepresented in the training data.
This might also explain why people's experiences with LLMs are very varied. If you stay in the happy path of CRUD web development and stuff all is nice and well, but if you start to veer off this path you get more and more challenged.
ecto 1 days ago [-]
Thanks for trying. What doesn't work? What did you try? If you're specific I'm happy to fix it.
ecto 1 days ago [-]
Tessellation is simply required to render the IR. The viewport is guiding the cursor to the vertices (perhaps a bug) but the engine is not forcing their use. I also built a ray caster :)
What wasn't working? I would love real feedback -
throwup238 1 days ago [-]
> I'm curious why you decided to go with "eager" tessellation. Creating a circle immediately results in a bunch of lines which resemble a circle but would fail under tangency constraints quickly. Is this a current limitation or part of the strategy for the kernel?
I’ve seen several vibe coded attempts at a geometric kernel (including several of my own) and this happens every time.
Vibe coding a geometric kernel is practically impossible because sooner or later* the LLM inevitably takes the tessellation shortcut and if you don’t catch it, the codebase is completely compromised. At the end of the day, there isn’t enough training data in architecture or algorithms (opencascade solvespace and truck being the only real examples, all significantly worse than commercial kernels like Parasolid or ACIS).
* usually as soon as you ask it to do anything non-trivial. If you’re lucky you’ll get a naive Newton marching algorithm on analytical bodies, which is slightly better but has the same problem with degenerate and pathological cases (coincidence, tangents, parallels)
ecto 1 days ago [-]
Can you give specific examples?
ecto 2 days ago [-]
(forgot to mention, it's wired up to Claude so you can vibe CAD, like OP but with a few more steps - I'd like to train a similar model soon! I also wrote about my first stab at this https://campedersen.com/cad0)
ugh123 2 days ago [-]
The examples they show are so basic.
dyauspitr 1 days ago [-]
Yeah they’re basically a single extrude of the sketch
clippy99 2 days ago [-]
Maybe I missed something, if you have the image rendering in the first place, you already (likely) have the CAD. It is a nice demo, but what is the utility?
soupspaces 2 days ago [-]
generate from sketch or replicate a part you don't have
mamami 2 days ago [-]
Ideally it would tie in with an llm, no? Like you would want to be able to say something like "create a design of car suspension subject to x,y,z contrains"
cush 2 days ago [-]
The input is images, and the output is CAD models, so it appears you could use a multi-modal LLM to natural language -> image -> CAD
ponyous 1 days ago [-]
I've seen this and other attempts like this[0] while exploring improvements for my CAD AI[1]. And I think these are potentially powerful solutions, but none of the current projects/weights have enough training (data or time) to make it work on arbitrary models. MeshCoder pretty much works only on models based of their training data. I haven't tried GenCAD but other commenters have confirmed my suspicion.
Anyone finding this interesting will likely also like OpenSCAD - generate 3D CAD models from code. https://openscad.org/
knollimar 2 days ago [-]
It says "can convert cad latents into a sequence of parametric CAD commands"
Which CAD program? I'm confused
Am I reading this right?
>Most importantly, GenCAD does not merely generate a 3D solid but also the entire CAD program.
dbcurtis 2 days ago [-]
> Which CAD program? I'm confused
Clue here:
> Our proposed GenCAD architecture...
So, at this point, it seems like this will work with all CAD programs, since they have yet to encounter any systems that they can't work with. More seriously, my guess would be whatever one is available for free in their lab. Kind of standard operating procedure for academic projects -- do a proof of concept, make a video that avoids known bugs, get a grade, push source to git, graduate. Good ideas come out of that... production code... eh... maybe.
More likely someone ends up in the situation that my kid did, previous graduate student's git repo is stale by 2 versions of C++, and 4 versions of ROS, and neither of the two unit tests still work after porting.
hug 2 days ago [-]
It's DeepCAD* output, it looks like, which is a JSON payload that is the sketch / extrude / whatever steps, which is itself based on Onshape output.
Looks like you can go JSON -> step files, but not really in such a way that you can modify any of the operations.
Doesn't matter. CAD models/objects are represented by a sequence of operations on a primitive or sketch. Unlike meshes, that describe the manifested resulting shape of objects in 3D programs like Blender.
So it's about the fact, that their model outputs that hierarchy of operations. The history of development, not just the result.
SchemaLoad 2 days ago [-]
How does it not matter? Every CAD program is not going to have exactly the same interface and commands. I doubt for example this will for example generate and OpenSCAD text file.
plumeria 2 days ago [-]
It could be used as pseudo-code for LLMs to produce specific CAD commands?
martinpw 2 days ago [-]
It will still be application dependent.
Code to compute fillets and blends gets incredibly complex when multiple surfaces are involved. And when surfaces are barely intersecting, or almost coincident, all bets are off what the command will do - very much depends on the geometry kernel and the tolerances it uses whether it decides the surfaces even intersect. And if it decides they don't intersect, all downstream commands will fail. Handling tolerances is one of the hardest aspects of CAD. (It's no coincidence that most open source CAD applications always demo with the same relatively basic types of models - they just can't do truly complex CAD.)
So a simple set of operations - cube, sphere, intersect - sure that will work anywhere and will be portable across applications and makes a nice simple demo. But once you start doing any serious CAD modeling the result is kernel dependent. That's why portable CAD formats like STEP do not preserve the commands used to generate the results. And why native CAD application formats do preserve the command history but are not portable across applications.
plumeria 1 days ago [-]
ideally, fillets are the last operations in the sequence. could the sequence of operations follow a topological ordering that makes it kernel independent?
SchemaLoad 2 days ago [-]
It could be anything which is why the question was asked what it actually outputs. I had a skim through the page and code but couldn't see what the output was.
itishappy 2 days ago [-]
Nothing stops you from storing a history of mesh operations. This is exactly what modifiers (including geometry nodes) do in Blender today.
2 days ago [-]
dajt 1 days ago [-]
I'm stumped by things like this. The drawing & modelling are not the difficult bit - the CAM programming is.
That seems difficult enough that I have not found an open source program to load a 3D model and allow me to set the toolpaths in a UI, never mind have an LLM generate them from the model.
throwup238 1 days ago [-]
> The drawing & modelling are not the difficult bit - the CAM programming is.
Actually the drawing and modeling are very much the hard part, so much so that the open source geometric kernels are decades behind the commercial ones. The computational geometry is genuinely a hard problem due to floating point errors and degenerate cases like parallel surfaces and tangent lines.
Once you have the geometric kernels, CAM is little more than a physically aware pathfinding optimization problem. Computationally expensive but otherwise straight forward. The kernel, on the other hand, has to be built up experimentally, tracking down every place where the math breaks down or there’s a pathological case, until you’ve got the thousands of special cases worked out.
regularfry 1 days ago [-]
That's a completely different difficult problem, and totally dependent on the manufacturing process. CNC? Sure. FDM from the same .step? Almost entirely irrelevant, that's the slicer's job. SLA? Doesn't make sense to ask the question.
physicsguy 2 days ago [-]
This is over a year old now, why post now? There have been other advancements in this area.
Is this Google-affiliated? The heading font is Product/Google Sans which IIRC only Alphabet is allowed to use and the entire webpage seems to be Google-style but neither of the two named researchers seem to be employed by Google?
"In 1975, Dr. Joseph Sharp proved that correct modulation of microwave energy can result in wireless and receiverless transmission of audible speech."
dang 20 hours ago [-]
Can you please stop posting about this issue? You've unfortunately been doing it excessively, including many repetitive comments. That's not a good use of HN.
I don't mean to come across as personally critical. From your comments it sounds possible (I am not sure, of course) that you have been having some distressing experiences. If so, we hope things improve. But please don't post these comments to HN - they aren't on topic here, and they're not an effective way to address the situation.
Lapsa 12 hours ago [-]
if you don't think it's a serious issue - would like to tell you that I currently have nothing to eat
Lapsa 12 hours ago [-]
what would you presume would be an effective way to address the situation? have tried just about everything
dang 44 minutes ago [-]
I can't presume anything, but from my limited perspective, what might work better is connecting with someone that you can talk with in person.
Re your other comment: I am sure it is a serious issue, although I don't understand it. It's just not an issue that can be solved through internet forum threads like HN.
I noticed in the GitHub that they mention it is only around 60% reliable even on their own training data, but the image shown on the front page feels pretty misleading. I made 10 images that were very similar in complexity to the examples shown, and even after running it around 50 times on each image, not a single one worked correctly. In the rare cases where it produced something, the output was completely wrong.
This seems pretty misleading in its current state and definitely needs more work.
In the limitation section they are quite direct with it: "images used .. are mostly isometric and noise-free CAD-images" and "limited CAD vocabulary used in this study needs to be extended by including more sophisticated CAD tokens such as revolve operation, edge operation (e.g., fillets/chamfers)". It currently supports only series of pads (can be subtractive). Many simple beginner exercises of seemingly similar complexity don't fit those constraints. Some of the parts shown could be more naturally created using wider set of tools, but technically can be created using only pads.
So even if you tried with clean screenshot of simple 3d model, it will likely fail if camera settings aren't right, and it will fail if model can't be represented using series of pad operations. Anything containing spheres, cones, nearly all lathe parts, fillets which can't be included in 2d sketches will fail. In theory arbitrary extrusion angles are supported, but all examples showed only axis aligned parts.
That said I wouldn't be surprised if it failed even if you considered exact limitations not just similar complexity in your attempts.
Assuming images in the googledrive are the training data, "mostly isometric and noise-free CAD images" is a bit of understatement. All of them are at very specific angles using and single style. Specific solid gray infill color for "images", and white infill with weird shading around perimeter for "sketches". Both with white background and pixelated non antialised 1px lines. No reason to expect it capable of processing anything which doesn't have exactly same visual style. For practical product that would have to be solved but that wasn't really the point of this research. All the style transference papers have show that it's more or less solvable problem, but for a paper exploring what model architecture and 3d representation could work best for AI cad it seems like unnecessary distraction that would only bloat the training costs and time. Most annoying part is that it makes hard to test the model with your own inputs.
So I would really appreciate a good AI/LLM tool that I can feed my sketch and parameters and it can save me hours of searching web and watching tutorials on how to extrude a circle over a curve
BTW, any existing AI tools work really well with OpenSCAD, so if you want a parametrized model that can be made out of simple shapes, I highly recommend this flow
There are mechanical engineers out there who can literally model objects nearly as fast and they can 'think' about the layout of said object. If you look at the complexity of, say, a CAD model from a real, highly complex aluminum casting section of an automotive subframe, or the living-room-sized cross-fuselage spar forging of a fighter aircraft, with hundreds of ribs and fillets and features- and compare that to the simple model you are trying to make in OpenSCAD, you should quickly realize the parallels in difficulty you are trying to express (similar to the person without knowledge of C++ or Python watching someone be able to build applications by typing code from their fingertips as if they already knew what to type...)
You are struggling for a few reasons- 1., it is a knowledge hurdle of an entire field you are trying to surmount- again, go watch someone actually model a real, complex part and watch the speed, they can do so in a tool like Solidworks, CATIA, NX, etc... at a rate that is far different because they have experience that it can honestly take even good people years to accumulate - and 2. they are using professional tools - you mention OpenSCAD, like it is CAD, but it isn't. It is programmatic mesh generation, and it turns out that programmatically typing out how to generate complex things is much more difficult than a combination of a graphical GUI and graph-based generator that all big CAD programs figured out starting in the 1980s. If those tools you use were really the best way to make complex models 'paramaterized', then why do we design our fighter jets, Formula 1 cars, or Space X rockets in Dassault's CATIA or Siemen's NX ?
You want a LLM to take a sketch to your CAD, but what I'm saying is, there are people out there that can skip the sketch and build the CAD as fast as you can likely hand draw the first sketch, and these are skills you can actually learn, but you may just be using the wrong tools and have not had the practice necessary.
like its purposefully built to be unusable
I think this is possible, but the ‘trick’ would be translating your instructions in English into some kind of language that the CAD software understands.
I’m on a bunch of 3D printing forums, and everyone tries to describe what the finished product would LOOK like. They end up making PICTURES when what they really want is a STL file.
Two dimensions are easier to visualize then three, so let’s put it this way:
If you wanted to turn “English” into “a 2D image that’s dimensionally accurate”, you’d want to translate from “English” to “SVG.”
SVG is dimensionally accurate. JPG isn’t. The file format itself has no concept of “dimensions” only “pixels.”
I haven't tried telling AI to "make a thing," but I'm able to get Co-pilot to refactor code. It's just the geometry that makes my head spin.
It will take much longer than a day for AI to get to this level, so there's not much to lose by just learning how to use the software now :)
across MEs, its also the most fun couple classes of the degree, since they build a skill other tha math - visuallizing objects in 2d and 3d at the same time, and guessing whats on the back side of drawings.
it will also inprove your sketches on paper, so they
a different option would be that if you know what you want, but cant be bothered to draw it beyond a sketch, you might actually want a small mill instead of a 3d printer.
From the outside, the hard part of designing a chair is making a blueprint. At least making a blueprint looks hard to people who've never made one. According to outsiders, the next layer of the onion is perhaps inserting reasonable constraint dimensions for similar reasons.
From the inside, as a guy who's recreationally made furniture, the hard part is judgment about joint selection and design, experience with wood warping (all wood changes shape with the seasons, a good woodworker makes it look easy to work around and a bad one makes expensive firewood that rapidly falls apart). Another insider PoV is judgment about wood selection to get the correct balance of final finish durability and appearance. Finally working toward outer layers of the onion, its time to do parametric joint design decisions... What's the ideal number and size of dovetail joints for, perhaps, a drawer.
I've seen prints of chairs before I don't need a LLM to make one similar to the ones I've seen before and could probably make from memory (at least ones I built myself), the library has loanable books and woodworking magazines. I do see the attraction from the outside.
Consider something like a Windsor chair. The larger the wedge in the spindles the tighter and longer lasting the chair until you break something trying to force them in; there's a lot of judgment and experience in designing, selecting, and installing spindles, but none of it is written down so it'll be hard to train a LLM... Tighten it until it breaks then don't tighten it that much next time. Most super detailed plans for Windsors are for inferior machine produced replicas which are not necessarily useful for a fine woodworker and are not exactly what craftsmen would aspire to. People who want "a cheap chair" will buy a 4-pak of folding chairs from walmart anyway, not make a homemade Windsor-style chair.
Another somewhat more blunt example is for actual woodworkers the "problem" with hand cut dovetails isn't knowing what they look like or how to make a diagram of one, but gaining the experience behind a hammer and chisel to push your luck while cutting them as far as possible without going too far and turning the part into scrap. One unavoidable part of woodworking is I've turned quite a bit of wood into scrap on the last step; oh well make another. At least I can burn scrap wood to keep warm LOL.
Its kind of like from outside the programming fraternity the non-programmers think the only skills required to program are typing real fast and being very experienced at fizzbuzz during interviews. But that doesn't work IRL, from an inside-out perspective.....
The woodworking world is not exactly lacking for a library of "semi-decent" plans. An automated system to make enormous quantities of low quality unverified and untested plans would not really help the field, no.
So why $work-1 spent so much time on this was quite logical. When you have point clouds generated from crappy head mounted cameras, you get models that are very complex.
for example, if you look at a point cloud of an Ikea LACK (https://www.ikea.com/gb/en/p/lack-nest-of-tables-set-of-2-wh...) It will be massively complex. this means that when you want to perform nay kind of interaction with it, its computationally difficult (https://www.researchgate.net/publication/221064696/figure/fi...)
So an active area of research is point cloud to "CAD" model (ie simplyfied, where a LACK tabl would be ~40 triangles rather than 400k)
One of those ways is to say "oh this pointcloud looks like a table, lets generate a bunch of hypothesis tables and see if they fit." One way to do that is to have a model that understands parametric CAD, and can create a number of tables with parameters that can be adjusted until it fits.
A perhaps easier way is to take a point cloud, get an image model trained on CAD models to draw models, in 2d imagery, then use something like this to get an actual model out.
Its not efficient, but it might work.
There are also lots of other cases, like automatic plagiarism, which are less good.
Basically leverage the randomness to create many variations, then select the most accurate variation automatically.
Terribly wasteful of time and processing power, but so is using GPU time to make pretty pictures randomly.
https://github.com/cjtrowbridge/vibe-modeling
I would even argue that for basic modelling majority of tools/features in CAD operate at the abstraction closer to CSG for describing what and B-rep is only treated as how. Just like good chunk of code based CAD use combination of CSG for what and triangle mesh based geometry engine for how. That's assuming you consider standard 2d->3d operations (extrude, revolve, sweep along arbitrary 2d profile) as valid primitives for CSG.
User comes into direct contact of B-rep in very specific situations: 1 doing operations like fillets/chamfers/draft/thickness based on intermediate geometry, 2 attaching sketches or other features to generated geometry or using generated edges (instead of new sketches) for guiding operations like complex sweeps, 3 surface based modelling workflows where you build up the the solid from individual faces typically including complex curved surfaces.
In case of 1 and 2 the the dependency on b-rep based representation is only marginal, in theory you could select edges in triangle mesh based underlying representation but the final result but quality of result wouldn't be as nice and TNP issues for parametric model editing would likely be even bigger than it is for existing CAD. That's not really CSG territory anymore but isn't exclusive to B-rep either, and involves a bunch of work that's outside the scope of B-rep. In non parametric mesh modellers with more destructive editing workflows like blender chamfers and fillets work fine. And if anything for reliable parametric models you often want to limit dependencies on intermediate geometry as that depends on CAD keeping track of where each edge/face originated from outside the b-rep and increases the chance of TNP issues.
3 is critical for industrial design containing large amount of complex curved surfaces like cars and other consumer products, but there are also many more technical parts where it can be completely ignored. Cad tutorials for beginner tutorials almost completely ignore this category of cad modelling. The part about not being exclusive to b-rep also applies for surface modelling part.
It's analogous to "all squares are rectangles, but not all rectangles are squares" (squares=CSG, rectangles=BREP)
CSG by itself isn't suitable for most CAD use-cases.
What is your workflow for llm integration to openscad?
For very simple geometries it works great, but it very quickly becomes apparent that there’s a bit of a disconnect between “LLM views image” and “LLM emits scad that looks like that image” when it comes to anything non-trivial.
Still gives me a starting point I can mess with, which is great since I have zero CAD training or experience.
(I’m not the commenter you replied to)
Once you have learnt a bit then the only FOSS options that are worth a damn are a) SolveSpace which is quite good and light, has a slightly quirky UI (but not in a bad way) but unfortunately has some critical missing features at the moment - notably bevels/chamfers. Although I did see someone made a sloppy PR to add them so we'll see where that goes.
Or b) FreeCAD which is actually good now and fairly close to SOLIDWORKS (at least for the basic stuff you're likely to use) and has a reasonably good UX. Some rough edges still but overall it's very usable. Good enough that I reach for it instead of pirating SOLIDWORKS these days.
The basic workflow is pretty simple:
1. Make some planes, referenced from existing geometry. 2. Make sketches on the planes. 3. Extrude/revolve them (either adding or subtracting from the existing geometry). 4. Repeat until you have the right shape. 5. Add a load of chamfers to make it pretty.
For LLM-assisted bespoke model generation it's still fine if you specify a process to follow, and can "speak the language" (knowing 1-5).
This is no different than purevibe vs LLM-assistance, IMHO. What TFA refers to is a more end-to-end, no iterative process, with no single touchpoint script like OpenSCAD offers, so it's very much _not_ a collaboration and requires no knowledge of how CAD models are made.
But this thread is moreso about iterating on an OpenSCAD specification using LLMs.
I've one shotted a light saber hilt with threaded parts and it worked flawlessly.
In comparison, here's one of my recent designs: what I would still call a very simple case [4]. And it's not like I'm a trained mechanical engineer working commercially, this is stuff I design in my spare time as a programmer.
[1] - https://github.com/cjtrowbridge/vibe-modeling/blob/main/outp...
[2] - https://github.com/cjtrowbridge/vibe-modeling/blob/main/outp...
[3] - https://github.com/cjtrowbridge/vibe-modeling/blob/main/outp...
[4] - https://object.ceph-eu.hswaw.net/q3k-personal/fe3e54e6df604a...
Ironically the former is engineered to avoid the latter.
Docker files alone is usually full of aptgets and curlshs. Which might be why the docker image wont build.
1Blocker and AdGuard.
For 1Blocker I have everything enabled except adult content and scripts. AdGuard has everything turned off except for General.
These are just the free versions too.
I've been using this setup for a few years and it works close to 100% of the time.
Every time I see one of these things,its like whoever worked on it doesn't know how to use CAD or understand what CAD is used for.
Every 6 months, I reevaluate how well LLMs can model from scratch or can modify existing files.
It's very superficial (atleast the last time I tried it). I'm guessing if/when LLMs crack visual reasoning, they might be able to do it.
I also wrote a bit about what goes into CAD apps! https://campedersen.com/tessellation
I can't help but to be skeptical of one person writing ~115k LOC in 4 months which is just the Rust crates, nevermind the frontend (which is another 100k LOC!!!).
I'm curious why you decided to go with "eager" tessellation. Creating a circle immediately results in a bunch of lines which resemble a circle but would fail under tangency constraints quickly. Is this a current limitation or part of the strategy for the kernel?
In my own project I use LLMs very sparingly and hesitantly, but made the observation that they are not very useful on the hard parts of CAD. I expect this is because of a lack of training material. Most professional CAD applications are proprietary and books on the topic are usually sparse on implementation details. The non-BRep CAD applications such as OpenSCAD and family are probably overrepresented in the training data.
This might also explain why people's experiences with LLMs are very varied. If you stay in the happy path of CRUD web development and stuff all is nice and well, but if you start to veer off this path you get more and more challenged.
What wasn't working? I would love real feedback -
I’ve seen several vibe coded attempts at a geometric kernel (including several of my own) and this happens every time.
Vibe coding a geometric kernel is practically impossible because sooner or later* the LLM inevitably takes the tessellation shortcut and if you don’t catch it, the codebase is completely compromised. At the end of the day, there isn’t enough training data in architecture or algorithms (opencascade solvespace and truck being the only real examples, all significantly worse than commercial kernels like Parasolid or ACIS).
* usually as soon as you ask it to do anything non-trivial. If you’re lucky you’ll get a naive Newton marching algorithm on analytical bodies, which is slightly better but has the same problem with degenerate and pathological cases (coincidence, tangents, parallels)
[0]: https://daibingquan.github.io/MeshCoder/
[1]: https://grandpacad.com
Which CAD program? I'm confused
Am I reading this right?
>Most importantly, GenCAD does not merely generate a 3D solid but also the entire CAD program.
Clue here: > Our proposed GenCAD architecture...
So, at this point, it seems like this will work with all CAD programs, since they have yet to encounter any systems that they can't work with. More seriously, my guess would be whatever one is available for free in their lab. Kind of standard operating procedure for academic projects -- do a proof of concept, make a video that avoids known bugs, get a grade, push source to git, graduate. Good ideas come out of that... production code... eh... maybe.
More likely someone ends up in the situation that my kid did, previous graduate student's git repo is stale by 2 versions of C++, and 4 versions of ROS, and neither of the two unit tests still work after porting.
Looks like you can go JSON -> step files, but not really in such a way that you can modify any of the operations.
* https://github.com/mightyhorst/DeepCAD
Doesn't matter. CAD models/objects are represented by a sequence of operations on a primitive or sketch. Unlike meshes, that describe the manifested resulting shape of objects in 3D programs like Blender.
So it's about the fact, that their model outputs that hierarchy of operations. The history of development, not just the result.
Code to compute fillets and blends gets incredibly complex when multiple surfaces are involved. And when surfaces are barely intersecting, or almost coincident, all bets are off what the command will do - very much depends on the geometry kernel and the tolerances it uses whether it decides the surfaces even intersect. And if it decides they don't intersect, all downstream commands will fail. Handling tolerances is one of the hardest aspects of CAD. (It's no coincidence that most open source CAD applications always demo with the same relatively basic types of models - they just can't do truly complex CAD.)
So a simple set of operations - cube, sphere, intersect - sure that will work anywhere and will be portable across applications and makes a nice simple demo. But once you start doing any serious CAD modeling the result is kernel dependent. That's why portable CAD formats like STEP do not preserve the commands used to generate the results. And why native CAD application formats do preserve the command history but are not portable across applications.
That seems difficult enough that I have not found an open source program to load a 3D model and allow me to set the toolpaths in a UI, never mind have an LLM generate them from the model.
Actually the drawing and modeling are very much the hard part, so much so that the open source geometric kernels are decades behind the commercial ones. The computational geometry is genuinely a hard problem due to floating point errors and degenerate cases like parallel surfaces and tangent lines.
Once you have the geometric kernels, CAM is little more than a physically aware pathfinding optimization problem. Computationally expensive but otherwise straight forward. The kernel, on the other hand, has to be built up experimentally, tracking down every place where the math breaks down or there’s a pathological case, until you’ve got the thousands of special cases worked out.
https://arxiv.org/abs/2603.04337 https://arxiv.org/abs/2603.05607 https://arxiv.org/abs/2605.01171
For a more detailed review: https://github.com/lichengzhanguom/LLMs-CAD-Survey-Taxonomy
"These fonts are licensed under the Open Font License. You can use them in your products & projects – print or digital, commercial or otherwise."
Then then have a trained llm that has can generate kcl to either create new parts or act as a llm assistant for changes to existing parts.
It’s neat that llms can do 3-D but I wonder how much of the problem is integration.
https://youtube.com/@thang010146
I don't mean to come across as personally critical. From your comments it sounds possible (I am not sure, of course) that you have been having some distressing experiences. If so, we hope things improve. But please don't post these comments to HN - they aren't on topic here, and they're not an effective way to address the situation.
Re your other comment: I am sure it is a serious issue, although I don't understand it. It's just not an issue that can be solved through internet forum threads like HN.